1. Punditas Discovery Engine 2. Punditas Vision Engine 3. Punditas NLP Engine 4. Punditas Behavior Engine Punditas AI for Adoption, Expansion and Usage of Enterprise Software To learn more, visit https://www.punditas.com Check out the Trial or Demo versions of Punditas AI Demo version of Punditas AI Signup for a Free Trial of Punditas AI For more information about... Continue Reading →
The new construction mode in Creo 8.0 allows you to sketch reference geometry with phantom lines, before you create the final geometry. This mode supports construction lines, arcs, rectangles, etc. This enhancement increases the variety of construction mode geometries. In addition, there is a new shortcut menu option that allows you to toggle the already... Continue Reading →
PTC released Creo 7.0.4.0 recently. Punditas AI Advisor now supports this latest version of Creo 7.0.4.0 . Punditas AI allows users to learn more about “How”, What” and “Why” of these enhancements through Product 360 module. The picture below shows the Module groups and the corresponding enhancements added within each group. To try this out,... Continue Reading →
PTC released Creo 8.0.0.0 recently. Punditas AI Advisor now supports this latest version of Creo 8.0.0.0 . Punditas AI allows users to learn more about “How”, What” and “Why” of these enhancements through Product 360 module. The picture below shows the Module groups and the corresponding enhancements added within each group. To try this out,... Continue Reading →
PTC released Creo 7.0.2.0 recently. Punditas AI Advisor now supports this latest version of Creo 7.0.2.0 . Punditas AI allows users to learn more about “How”, What” and “Why” of these enhancements through Product 360 module. The picture below shows the Module groups and the corresponding enhancements added within each group. To try this out,... Continue Reading →
The following are 6 MBD related enhancements in Creo 7.0 - Control gap between a GTOL frame and Indicator frame If you have a drawing that is designed against the 2012 version of ISO 1101, and you need to make it compliant with the 2017 version , you can use this detail option to help... Continue Reading →
Starting with Creo 7.0, Multibody definition is maintained during data exchange. This helps preserve design intent during an Import/Export operation. The multibody definition is maintained in both exported and imported Creo Parametric 7.0 geometry. Export operation Multibody models in Creo Parametric preserve multibody definitionBody characteristics, such as body name and body appearances, are transferredConstruction bodies for each exported profile... Continue Reading →
Starting with Creo 7.0, there's better control over the placement of ordinate dimensions that are created in models and drawings. Prior to this Creo 7.0 release, when creating ordinate dimensions per ANSI standards, these dimensions would get placed when they are aligned with the baseline. However, this can now be controlled using "default_ansi_ord_dim_aligned" config option.... Continue Reading →
If you have a part with interfering bodies or an assembly with interfere hidden lines removed. You might also want to see a drawing for a part or assembly with interfering parts or components, correctly with hidden lines removed. Starting with Creo 7.0, you can use the below config option to accurately remove the Hidden... Continue Reading →
When you place a leader annotation on an edge, the normal or tangent leaders appear as soon as the cursor position is beyond the snapping angle threshold. You may turn off this snapping in order to place a leader annotation very close to a normal or a tangent placement without the snapping. With Creo 7.0.1.0,... Continue Reading →
Punditas 